stainless steel
416 Stainless Steel Coil
We ensure that every product we offer meets the highest standards of quality and reliability. Factory test certification is included with the shipment and third party inspection is available.
We provide comprehensive steel processing services such as cutting, bending, welding, and finishing.
Customizable: Available in various sizes and thicknesses to meet specific project requirements. Free samples are available, Customized samples will take about 5-7days. Customized logo , Customized packaging , Product customization.
Our location is Wuxi, Jiangsu, China
416 Stainless Steel Coil Description
416 stainless steel coil has superb mechanical properties, and its tensile strength, yield strength and elongation are higher than ordinary stainless steel. In addition, its excellent low-temperature toughness can hold good mechanical properties at lower temperatures. 416 stainless steel has excellent corrosion resistance and can maintain good stability in a range of corrosive environments. Its corrosion resistance is mainly a result of the high content of chromium, which can react with oxygen to form a dense oxide film on the surface to prevent the metal inside from corroding. Because of its excellent corrosion resistance and mechanical properties, 416 stainless steel coil is commonly used in fields including petroleum, chemical industry, pharmaceutical, food, environmental protection.
Product Parameters
Product Name | 416 Stainless Steel Coil |
Type | Steel Coil |
Thickness | 2.5mm-10.0mm |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc. |
Width | 610mm-2000mm |
Standard | ASTM, AISI, JIS, GB, DIN, EN, etc. |
Surface | BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc. |
Scope of Application | Widely used in high temperature and electrical industry, medical equipment construction, chemical, food industry, agriculture and ship parts, food and beverage packaging, Kitchen supplies, trains, airplanes, conveyor belts, vehicles, bolts, nuts, springs and screens, etc. |
Certificate | ISO, SGS, BV, etc. |
Production Technology | Hot Rolling, Cold Rolling |
Edge Processing | Edging, Trimming |
Chemical Composition
C | Si | Mn | Cr | S | P | |
≤ 0.15 | ≤1.0 | ≤ 1.25 | 12.0～14.0 | ≤ 0.15 | ≤ 0.06 | |
Mechanical Properties
Tensile StrengthKb (MPa) | Yield Strengthσ0.2 (MPa) | ElongationD5 (%) | Hardness |
≥540 | ≥275 | ≥20 | ≤ 201HB |
Physical Performance
Density(g/cm³) | Modulus of Elasticity(Gpa) | Coefficient of Thermal Expansion(10-6/°C) | Coefficient of Thermal Conductivity(W/m*K) | Resistivity(NΩ.m) |
7.80 | 200 | 9.9 | 24.9 | 570 |
Surface Selection
